September 10 : How do WE use them!
(PART 3)
Embedded Files
Thursday, October 30 :: Click Link for assignment >
PLEASE KEEP CELL PHONES AWAY!
PLEASE KEEP CELL PHONES AWAY!
Expectations:
Expectations:
C: Voice Level 2 (only the people next to you can hear you and no shouting across the room)
H: Ask your team, elbow partner or raise hand
A: Work on the assignment
M: Stay in your assigned seat
P: Work till assignment is completed
S: Finishing your work
Photography ID Badges!
Photography ID Badges!
They are YOUR responsibility!
Badges MUST be worn when outside of the classroom taking photos
Must be used only during the class period you are assigned
Badge goes with camera...it MUST be returned with Camera!
$10 fee for missing or damaged badge! No camera checkout if fee is not paid!
Get to know your camera!
Get to know your camera!
Today we will go over the CAMERA we will be using!
Today we will go over the CAMERA we will be using!
Canon EOS R50
WHAT ARE WE LEARNING: About OUR Digital Cameras (Canon R50)
WHY IS IT IMPORTANT: Clearly understanding your camera's functions is essential for capturing high-quality images and maximizing your creative potential. We will explore some of the critical functions commonly found in the Canon R50 Mirrorless camera and how they can be used to enhance your photography.
HOW WILL MY TEACHER KNOW WHAT I LEARNED: You will follow along with instruction and use what we have learned to handle the camera properly!
STUDENTS DO NOT...
STUDENTS DO NOT...
Do NOT remove a lens. If a lens change is needed please ask!
CANON EOS R50
Let's Continue!
NOW...
NOW...
Take the BATTERY out, place it on your desk
Take the SD CARD out, place it on your desk
Insert the BATTERY , then insert the SD CARD and close the compartment door!
Door for Battery/SD card located on bottom of camera...
Open Battery/SD card door...
Insert battery as shown...
Push until battery clicks in place. Gray lever is a slide lever that locks when the battery goes in. Do NOT force it!
Removing/Installing Battery
Door is located on the BOTTOM of the camera
Click the lever to open the door
Look for the notch on the battery
Use the notch to line up with the gray lever inside the battery compartment
Insert battery
Push (gently) until battery locks in place
Door for Battery/SD card located on bottom of camera...
Memory card goes in as shown...
Push (gently) to click into place
Close and lock battery/SD card door...Pull tab to left to Lock!
Install your Memory card (SD Card)!
Door is located on the BOTTOM of the camera (with the battery)
R50 has ONE card slot
Click the lever to open the door
Insert the card in to slot with the label facing the front of the camera (lens side).
Push (gently) until Memory card clicks in place
Close and Lock door! (door does NOT auto lock!)
Let's turn ON the camera!
On the TOP
Push the ON/OFF lever to ON
Remember to turn OFF before removing SD card!
Set your camera to M (Manual)!
Set your ISO first!
Located on the top right, next to shutter button...
ISO button
Push to change your ISO (sensitivity of your sensor)
Remember to set it to you BASE ISO (100) first!
LCD SCREEN : ISO
The screen is a touch screen
You can use your finger to slide the ISO to the base ISO: 100
OR you can use the dial on the top of the camera!
BACK OF CAMERA
Cross Keys are located BELOW the MENU button...
CROSS KEYS
Exposure Compensation (Up)
Self-Timer/Drive Mode (Right)
Erase Button (down)
AF/MF Button (left)
WHITE BALANCE
TOGGLE TO CUSTOM!
Once there...
Click the MENU button to shoot to set the WB (White Balance)
Then we take a WHITE piece of paper
Make sure it is in full screen (cover the front of the lens when viewing the LCD) and take a picture of the paper!
Our Data will show on the LCD and we have set our White Balance to our surroundings!
In photography, color temperature is a crucial aspect that affects the colors in our images.
We can also measure by the color temperture of light!
Toggle to COLOR TEMP
A general guideline for exploring color temperatures in photography is as follows:
Tungsten light:
Warm and yellow, typically around 3200K. (Like household incandescent bulbs)
Daylight:
More neutral or slightly cool white light, considered the industry standard at approximately 5600K. (Midday, sunny sky)
Cloudy conditions:
Cooler than direct daylight and tend to be more bluish, falling into the 6000-7500K range.
Sunrise/Sunset:
Light is significantly warmer and more reddish-orange than daylight, with temperatures generally between 2000-3000K.
HOLDING THE CAMERA
(1) Horizontal shooting
(2) Vertical shooting
With your right hand, hold the camera firmly by the camera grip.
With your left hand, support the lens from below.
Rest your right index finger lightly on the shutter button.
Rest your arms and elbows lightly against the front of your body.
To maintain a stable stance, place one foot slightly ahead of the other.
Hold the camera near your face and look through the viewfinder.
5 STEPS TO PICTURE TAKING!
5 STEPS TO PICTURE TAKING!
Put the strap around your neck!!
Set your ISO (film speed.) Do this by pressing the ISO button and rotating the selector dial. Start with ISO 100.
Set slower speeds for bright sun, faster speeds for indoors and at night. You may also set to ISO-Auto. ISO-400 for most shooting.
Set your mode dial to M (manual). Then, set your shutter speed for:
INDOORS...1/60
OUTDOORS... 1/250 or faster.
Do this by rotating the selector dial (on top by the shutter release button).
Tap the shutter button. This turns on the light meter.
After pressing the Shutter button half way, rotate the dial until the line is in the middle of the METERING SCALE.
Focus and zoom carefully.
Looking through viewfinder (seen on screen inside):
Back of Camera (LCD Screen):
Press the Shutter button half way...
Look at the back LCD screen to see the exposure compensation meter (also called the METERING SCALE).
Be aware! When changing exposure compensation, it will never change back to zero unless YOU change it.
To get an exceptable exposure, we are trying to get the center line of the metering scale to the 0 mark!
After you have downloaded your images to a computer
Let's FORMAT our card!
Make sure your images have been downloaded to your computer (we will get the that soon!)
Put the SD card back into the camera and close the card door
PRESS THE MENU BUTTON
Toggle with the RIGHT cross Key to the tools "folder"
Or press the Yellow Tools Icon on your LCD screen
Toggle with the DOWN cross Key to FORMAT CARD
Press SET button to Select
This screen gives you a chance to change your mind!
Toggle with the Right cross key to OK
Press SET button to select
Formatting should begin (takes a few seconds)
Please wait for it to complete!
ALWAYS...make sure you have downloaded your images BEFORE formatting a card. You CANNOT get them back!
TURN CAMERA OFF!
Push the ON/OFF lever to OFF
Remember to turn OFF before removing SD card!
Canon Challenge!
Show me on your screen when you are done!
Try for a 6 Out of 6!
Stopping motion in Photography!
Stopping motion in Photography!
Start by setting your ISO at 100. This is your base ISO.
Lower your Aperture (move to the left as far as it will go 2.8).
To stop motion, you need a FAST shutter speed. Move the slider to the right to 1/4000 SEC.
But the exposure meter needs to be in the center right? Adjust the ISO until the meter is in the center! (6400)
Typically we want to use the LOWEST ISO possible! But if the effect we want (like stopping motion) ends up making the photo under exposed (dark) we need to adjust/increase the ISO. If the effect makes the image too bright, decrease the ISO... TRY IT!
SHORTCUT TO LOG OFF COMPUTER!
SHORTCUT TO LOG OFF COMPUTER!
Remember to SAVE (ctrl + S) any file before doing this shortcut!
Remember to SAVE (ctrl + S) any file before doing this shortcut!
Ctrl+Alt+Delete then select SIGN OFF!
Please place HEADPHONES on your Monitors!
Page updated
Google Sites
Report abuse